傑瑞叔叔手作相機坊

I hope you can understand what I tried to say, because my English is so poor.
First, you need an empty film roll, and of cause a new film
 
Cut the front end of the new film


Use adhesive tape to tape the empty roll and new film together.


Gently to pull up the knob, the empty film roll will be set.

Put the empty film roll into the left side camera.

Load the new film into the right side

Remember the click device must inside a film hole. Otherwise you wont hear the click sound.
And please do not use your finger to play the click device, is it not very strong.

Replace the camera back

please follow the direction to turn the film and open the shutter.
After the film is loaded, turn the knob for 18 clicks, then the first photo is ready to be shot.
And then, turn the knob for 16 clicks for the next photo. You can take about 22 to 24 pictures.


After about 22 to 24 shots, you will find the knob is not able to turn anymore.
That means you have finish this film. You have two ways to take the film out of camera.

1. Open the camera back and take out the film, in this case, you will lost the last photo.

2. Open the camera back in a darkroom or darkrrom bag, and turn all film into the film roll.
    so the last photo will be saved.

Take the film out of the camera, it is ready to development.